Miniatures Star Trek à imprimer : Borg TNG vs Klingons TOS

Réponse rapide

Pour la plupart des tables de Star Trek Adventures, l'option Borg TNG est le meilleur premier achat à imprimer chez soi, car les Borg sont une menace récurrente à l'échelle de la faction qui bénéficie de plusieurs drones identiques sur la table. L'option Klingon TOS est préférable si vous dirigez des histoires de la Série Originale ou si vous voulez un seul commandant miniature avec du caractère pour ancrer une rencontre klingonne. Les deux sont à l'échelle 32mm, donc la vraie décision dépend de l'ennemi que votre équipage est le plus susceptible d'affronter.

Les miniatures à imprimer chez soi résolvent un problème précis pour les groupes de Star Trek Adventures : vous voulez le bon ennemi sur la table sans attendre un réapprovisionnement ni payer une boîte complète. Le piège, c'est que toutes les sorties print-at-home ne font pas le même travail. Certaines sont conçues pour être imprimées en multiples comme forces de base, tandis que d'autres sont des pièces uniques qui récompensent une impression et une peinture soignées.

Cette comparaison examine deux options print-at-home très différentes : un drone Borg de l'ère TNG et un guerrier Klingon TOS. Je vais couvrir l'usage réel de chacun, comment le processus d'impression et de préparation diffère, et lequel mérite une place dans votre première commande. Si vous construisez une collection Star Trek Adventures de zéro, c'est la décision qui vous fera économiser le plus de résine gaspillée et de temps de peinture.

À quoi sert réellement chaque figurine

Le drone Borg est une pièce ennemie de l'ère TNG conçue pour le jeu de rôle sur table Star Trek Adventures. Les rencontres Borg dans STA tendent à jouer sur la pression et le nombre : un seul drone est une énigme, mais trois ou quatre drones sur la table changent la façon dont vos joueurs se déplacent, dépensent leur Momentum et décident de battre en retraite. Cela fait d'un Borg à imprimer chez soi un excellent candidat pour l'impression de plusieurs exemplaires.

Le guerrier Klingon TOS est une pièce de l'ère de la Série Originale. Les rencontres Klingon de cette époque sont généralement plus personnelles : un groupe d'abordage, un commandant fourbe, une rencontre diplomatique qui tourne mal. Vous n'avez rarement besoin de six exemplaires, mais vous voulez souvent un modèle qui se distingue clairement sur la table en tant qu'individu avec un nom et un motif. Les deux miniatures résolvent des problèmes différents, c'est pourquoi la comparaison ne porte pas vraiment sur la qualité.

• Comptez combien d'ennemis identiques vos trois dernières sessions ont réellement utilisés avant de décider lequel imprimer en premier.

Échelle, matériau et préparation d'impression

Les deux miniatures sont à l'échelle 32mm, elles s'intègrent donc dans la même classe de taille que le reste de votre collection Star Trek Adventures. Cela compte plus qu'on ne le pense : mélanger les échelles est le moyen le plus rapide de faire paraître une table bien peinte incorrecte. Si votre équipe existante et vos miniatures d'équipe au sol sont en 32mm, les deux s'aligneront sans ajustement.

Les fichiers d'impression sont pré-évidés lorsque possible, et des versions supportées sont incluses pour faciliter l'impression. Le pré-évidage réduit l'utilisation de résine sur les formes plus grandes ou plus volumineuses, ce qui est plus visible lorsque vous imprimez plusieurs copies du même drone. Les versions supportées vous évitent de construire vous-même les supports, étape la plus susceptible de provoquer un échec d'impression si vous débutez en résine. Le compromis est que les fichiers pré-supportés vous donnent moins de contrôle sur l'orientation et le placement des supports qu'un fichier que vous supportez manuellement.

• Print one test copy before committing to a batch, especially if you plan to print multiple Borg drones.
• If you already have a support workflow you trust, the unsupported files may still be the better choice for you.

Painting and table presence

Borg drones are forgiving to paint. The palette is narrow, the surfaces are largely mechanical, and uniformity is the point. If you are painting four or five of them, a simple basecoat, wash, and a few metallic accents will get them table-ready quickly. That repeatability is a real advantage when you need a squad rather than a single hero.

Klingon warriors reward more deliberate painting. Armor panels, sash, and skin tones give you places to add contrast, and a single well-painted Klingon commander can carry a scene in a way a drone cannot. The trade-off is time: if you paint one Klingon to a high standard, you will not want to rush the next four. That naturally pushes Klingon purchases toward one or two miniatures rather than a full squad.

• Batch-paint Borg drones in groups of three or four to keep the color mix consistent.
• Paint the Klingon's face and sash last, when the rest of the model is already sealed and you can focus on the focal points.

How they fit into a campaign

If your campaign is a TNG-era game, Borg are one of the few enemies that justify a recurring, escalating presence. Printing several drones lets you scale an encounter from a single scout to a full boarding action without buying a new box each time. That flexibility is the main reason the Borg option is the safer first purchase for most groups.

If your campaign is set in the Original Series era, or you run one-shots and convention games, the Klingon warrior is the more efficient pick. You get a recognizable, era-appropriate antagonist that works in social scenes as well as combat, and you are not paying to print miniatures you will only use once. Neither choice is wrong, but they point in different directions.

• Match the miniature to the era your group actually plays, not the era you like best.

Trade-offs at a glance

• Borg drone: quantity over character: The Borg option is built for repetition. Printing several identical drones is cheap in resin and fast to paint, but each individual drone has less personality than a named character. Choose this if your campaign uses Borg as a recurring, scaling threat.
• TOS Klingon: character over quantity: The Klingon warrior rewards careful painting and works well as a single named antagonist, but you are unlikely to need more than one or two, so the value per print is lower. Choose this if you run era-specific Original Series stories or convention one-shots.
• Print prep: supported files save time, cost control: Both options include supported versions and are pre-hollowed where possible. That lowers the barrier for new resin printers, but experienced printers may prefer to support their own files for better orientation control. Print one test copy before batching either option.
• Scale: both are 32mm: Because both miniatures are 32mm scale, they will sit consistently with the rest of your Star Trek Adventures collection. Scale is not the deciding factor here. Base your choice on era and encounter type, not size.

Product facts that affect your choice

• Star Trek Adventures - Print At Home - Iconic Villains General Chang: This 3D print product lets you print 1 highly detailed, 32mm scale multipart miniature of General Chang for use with the Star Trek Adventures tabletop roleplaying game. Files have been pre-hollowed where possible, and all files include supported versions for easier printing. General Chang is a named TOS-era film villain rather than a rank-and-file trooper, so he works as a single centerpiece antagonist. The pre-hollowed and supported files reduce prep time if you only plan to print one copy.
• Star Trek Adventures - Second Edition - Game Token Set: This official set of 30mm etched acrylic tokens contains 6 blue Momentum tokens, 24 red Threat tokens, and 12 additional tokens, and is a pre-order with shipping expected to start September 2026. If you are adding physical miniatures to your table, matching tokens keep Momentum and Threat tracking readable and consistent. The pre-order timing means it will not arrive for an immediate session, so plan around that if you need tokens now.
• Fallout: Miniatures - Cryptids - Grafton Monster: This miniatures set is part of THE WILDS OF APPALACHIA wave for Fallout: Miniatures, and the Grafton Monster is described as a legend of local folklore made flesh by West Tek through FEV experiments. Included here as a comparison point: it shows how a single monster miniature can anchor an entire encounter. That is the same role a named Klingon or a Borg drone plays in Star Trek Adventures, which is useful when deciding whether you need one miniature or several.
• The Elder Scrolls: Call to Arms - Dwemer Walls and Pillars: This set provides Dwemer architectural terrain, with defined angular forms and decorative shapes carved into stone walls or embossed with burnished metal. Terrain competes for the same hobby time and budget as miniatures. If your table already has strong terrain, spending on characterful enemy miniatures will improve your sessions more than adding more scenery.

Print one test copy before committing to a batch, especially if you plan to print multiple Borg drones.

If you already have a support workflow you trust, the unsupported files may still be the better choice for you.

• Painting and table presence
• Borg drones are forgiving to paint. The palette is narrow, the surfaces are largely mechanical, and uniformity is the point. If you are painting four or five of them, a simple basecoat, wash, and a few metallic accents will get them table-ready quickly. That repeatability is a real advantage when you need a squad rather than a single hero.
• Klingon warriors reward more deliberate painting. Armor panels, sash, and skin tones give you places to add contrast, and a single well-painted Klingon commander can carry a scene in a way a drone cannot. The trade-off is time: if you paint one Klingon to a high standard, you will not want to rush the next four. That naturally pushes Klingon purchases toward one or two miniatures rather than a full squad.

Batch-paint Borg drones in groups of three or four to keep the color mix consistent.

• Paint the Klingon's face and sash last, when the rest of the model is already sealed and you can focus on the focal points.
• How they fit into a campaign
• If your campaign is a TNG-era game, Borg are one of the few enemies that justify a recurring, escalating presence. Printing several drones lets you scale an encounter from a single scout to a full boarding action without buying a new box each time. That flexibility is the main reason the Borg option is the safer first purchase for most groups.

If your campaign is set in the Original Series era, or you run one-shots and convention games, the Klingon warrior is the more efficient pick. You get a recognizable, era-appropriate antagonist that works in social scenes as well as combat, and you are not paying to print miniatures you will only use once. Neither choice is wrong, but they point in different directions.